1998 ICON CEM19B

    £17,915 
    Prix rentré à: USD $24,000
    Localisation de la machine:addressWichita, Kansas, États-Unis 67214

    Information sur le vendeur

    Voir les informations du vendeur

    Foley Equipment Company

    Contact:Contact Foley Equipment

    Téléphone:+1 316-226-7133

    Wichita, Kansas, États-Unis 67213

    veuillez consulter notre site web

    +1 316-226-7133

    Cacher les miniatures

    Description

    MACHINE IS ON CONSIGNMENT BY A LOCAL CONTRACTOR. SELLING AS IS WHERE IS WITH ALL KNOWN AND UNKNOWN FAULTS INCLUDING SAFETY ITEMS. NO WARRANTY EXPRESSED OR IMPLIED. HOURS MAY VARY AS IT IS STILL IN USE Z-MACHINE IS ON CONSIGNMENT BY A LOCAL CONTRACTOR. SELLING AS IS WHERE IS WITH ALL KNOWN AND UNKNOWN FAULTS INCLUDING SAFETY ITEMS. NO WARRANTY EXPRESSED OR IMPLIED. HOURS MAY VARY AS IT IS STILL IN USE Equipment-certification-code: NCR

    Spécifications

    Année1998
    fabricant ICON
    ModèleCEM19B
    Numéro de série19BE1123
    EtatOccasion
    Numéro de Stock25B402
    Année1998|
    fabricant ICON|
    ModèleCEM19B|
    Numéro de série19BE1123|
    EtatOccasion|
    Numéro de Stock25B402|
    montrer en paragraphe

    Informations d'inspection

    GENERAL APPEARANCE

    Cleaning RequiredYes
    FrameGood
    PaintFair
    Notes - GENERAL APPEARANCERe-welded in several places
    Paint CommentsSurface rust

    HYDRAULICS

    Leaks - HYDRAULICSYes
    Apron CylinderFair
    Hose LinesFair
    Rear Lift CylindersFair
    Notes - HYDRAULICSCould not test any of the functions due to it, not being hooked up to a machine. Oily buildup around the hydraulic lines and all the lift cylinders.
    Apron Cylinder CommentsBoth cylinders are covered in oily buildup and will need observed when hooked to a machine to identify where the leaks are coming from.
    Hose Lines CommentsAll the hoses rubber casing is worn and metal braiding is rusted.
    Rear Lift Cylinders CommentsBoth lift cylinders are covered in oily buildup.

    SCRAPER

    ApronFair
    BowlFair
    Cutting EdgeFair
    EjectorFair
    Apron CommentsApron pens are welded into place.
    Bowl CommentsSection of metal cut off of both sides near the top.
    Cutting Edge CommentsCutting edge is worn, but still has life left in it
    Ejector CommentsThe cutting-edge bottom of the apron is worn and the screens at the top are missing.
    Ejector Rollers CommentsCould not get a good look at these

    TIRES

    Left RearSerial: Deestone DL-3;TreadDept: 20;ReCapped: No;TreadCutsChucks: No;SideCutsSection: No
    Right RearSerial: Deestone DL-3;TreadDept: 21;ReCapped: No;TreadCutsChucks: Yes;SideCutsSection: Yes
    Average Life Remaining - TIRES35%
    Notes - TIRESTires are pretty old both inside. Tires appear to be dry rotted.
    Tire Size - TIRES20.5-25R

    COMMENTS, MISC. REPAIRS, GENERAL REMARKS

    comment 1Could not verify serial number or model number. There have been metal reinforcing plates welded over the spot where the serial number is.
    comment 2MACHINE IS ON CONSIGNMENT BY A LOCAL CONTRACTOR. SELLING AS IS WHERE IS WITH ALL KNOWN AND UNKNOWN FAULTS INCLUDING SAFETY ITEMS. NO WARRANTY EXPRESSED OR IMPLIED. HOURS MAY VARY AS IT IS STILL IN USE

    GENERAL APPEARANCE

    Cleaning RequiredYes|
    FrameGood|
    PaintFair|
    Notes - GENERAL APPEARANCERe-welded in several places |
    Paint CommentsSurface rust |

    HYDRAULICS

    Leaks - HYDRAULICSYes|
    Apron CylinderFair|
    Hose LinesFair|
    Rear Lift CylindersFair|
    Notes - HYDRAULICSCould not test any of the functions due to it, not being hooked up to a machine. Oily buildup around the hydraulic lines and all the lift cylinders.|
    Apron Cylinder CommentsBoth cylinders are covered in oily buildup and will need observed when hooked to a machine to identify where the leaks are coming from.|
    Hose Lines CommentsAll the hoses rubber casing is worn and metal braiding is rusted.|
    Rear Lift Cylinders CommentsBoth lift cylinders are covered in oily buildup. |

    SCRAPER

    ApronFair|
    BowlFair|
    Cutting EdgeFair|
    EjectorFair|
    Apron CommentsApron pens are welded into place.|
    Bowl CommentsSection of metal cut off of both sides near the top.|
    Cutting Edge CommentsCutting edge is worn, but still has life left in it|
    Ejector CommentsThe cutting-edge bottom of the apron is worn and the screens at the top are missing.|
    Ejector Rollers CommentsCould not get a good look at these|

    TIRES

    Left RearSerial: Deestone DL-3;TreadDept: 20;ReCapped: No;TreadCutsChucks: No;SideCutsSection: No|
    Right RearSerial: Deestone DL-3;TreadDept: 21;ReCapped: No;TreadCutsChucks: Yes;SideCutsSection: Yes|
    Average Life Remaining - TIRES35%|
    Notes - TIRESTires are pretty old both inside. Tires appear to be dry rotted.|
    Tire Size - TIRES20.5-25R|

    COMMENTS, MISC. REPAIRS, GENERAL REMARKS

    comment 1Could not verify serial number or model number. There have been metal reinforcing plates welded over the spot where the serial number is.|
    comment 2MACHINE IS ON CONSIGNMENT BY A LOCAL CONTRACTOR. SELLING AS IS WHERE IS WITH ALL KNOWN AND UNKNOWN FAULTS INCLUDING SAFETY ITEMS. NO WARRANTY EXPRESSED OR IMPLIED. HOURS MAY VARY AS IT IS STILL IN USE|
    montrer en paragraphe

    Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.

    Your browser is not supported

    Microsoft Edge

    Google Chrome

    Mozilla Firefox