Description
Pull Grader
For use with tractors in the 70 – 200hp plus range.
* Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to implement.
Width measured with the blade at 45° angle. Height measured with blade resting on ground. Blade ground clearance
depends on blade angle and drawbar height.
NOTE: This implement requires hydraulic control. Three rear tractor hydraulic circuits required for implement operation.
The right and left blade swing circuit is equipped with a crossover relief valve factory preset at 1300 psi ± 50psi.
Overall Dimensions:
-Length: 17'7" (5.4 m)
-Width: 8'8" (2.6 m)
-Height: 3'7" (1.1m)
Blade Length: 12'0" (3.7m)
Ground Clearance: 12" (305mm)
Suggested Engine HP: 90-150
Net Weight: 3,660 lbs (1,660 kgs)
FEATURES:
• Used to economically dress road shoulders; construct and maintain ditches, haul and field roads, terraces, and levees.
• Laser adaptable to allow contractors to finish grade to exact specifications and farmers to precision level fields.
• ROME sloper blade, heavy duty 3/4” (19mm) thick high strength steel with replaceable cutting edges and end bits.
• Operator has hydraulic control of blade angle, blade tilt, and transport wheels from the tractor seat.
• Hydraulically operated 45° blade angle front to rear or left to right, 18° blade tilt up and down.
• Walking beam transport group with dual wheels.
• Weight box allows extra weight to be added if desired.
Standard Equipment:
• Weight Box – PG-10 & PG-12: up to 3000lbs (1361kg). PG-16: up to 4000lbs (1814kg).
• Hubs with slip in bolt on spindles – PG-10 & PG-12: six bolt. PG-16: eight bolt.
• Offset walking beam transport unit.
• Crossover relief valve.
• Transport light group.
Optional Equipment:
• Box scraper group.
• Laser mast assembly.Spécifications
Année2026
fabricant ROME
ModèlePG12
EtatNeuf
Année2026|
fabricant ROME|
ModèlePG12|
EtatNeuf|
